Product Parameters
Interstitial elements such as O, N, and C have a significant impact on the mechanical properties of cast titanium materials. When the content of interstitial elements does not exceed the upper limit, the content of oxygen, nitrogen, and carbon has a considerable effect on the mechanical properties of titanium, especially the tensile strength, yield strength, and Vickers hardness, which show an almost linear increase with the increase in element content, while the plastic elongation shows a significant decrease. In addition, the influence of different elements on the properties decreases in the order of N > O > C. As shown in Table 1.
| Serial Number |
Mass fraction,% |
Tensile Strength/MPa |
Yield Strength/MPa |
Elongation/% |
|||
|
N |
O |
C |
O2 |
||||
|
1 |
0.008 |
0.074 |
0.000 5 |
0.090 33 |
415.5 |
271.3 |
41.3 |
|
2 |
0.002 |
0.1745 |
0.019 |
0.191 23 |
507.5 |
420 |
24 |
|
3 |
0.019 |
0.151 |
0.005 |
0.192 35 |
483.3 |
392.6 |
24.3 |
|
4 |
0.011 |
0.182 |
0.000 5 |
0.204 33 |
510.3 |
436.7 |
21.2 |
|
5 |
0.008 |
0.201 |
0.000 5 |
0.217 33 |
525 |
435 |
16 |
|
6 |
0.012 |
0.219 |
0.000 5 |
0.243 33 |
538 |
456.7 |
17.5 |
|
7 |
0.002 |
0.24 |
0.007 |
0.248 69 |
551.1 |
482.6 |
14.5 |
|
8 |
0.012 |
0.212 |
0.02 |
0.249 40 |
562 |
451 |
24.7 |
Application Areas
In the aerospace field, pure titanium castings are used for critical components such as engine blades and compressor casings, which can reduce weight and improve performance. In the medical field, they can be used to manufacture implants such as artificial joints and cardiac stents. In the chemical and marine engineering fields, pure titanium castings can be used to make corrosion-resistant components such as valves and pump bodies. In addition, they are also used in sporting goods, such as golf club heads and bicycle parts. As shown in the figure.

Product Details
Different standards have varying requirements for the maximum levels of impurity elements such as O, N, C, and H in pure titanium products, and the specific differences are shown in Table 2. Due to the differences in impurity elements contained in titanium sponge, the impurity content in cast ingots from different batches varies slightly, resulting in differences in mechanical performance. Moreover, there is a significant correlation between the content of impurity elements and whether the mechanical properties of pure titanium castings meet the standards. Therefore, in the actual production of pure titanium castings, it is very necessary to study the effect of impurity elements such as O, N, C, and H on the mechanical properties of pure titanium castings.
| Standard Number | Brand |
Element Content(Mass fraction,%) |
Applicable to | |||
|
C |
O |
N |
H |
|||
|
GB/T3620 |
TA1ELI |
0.03 |
0.10 |
0.012 |
0.008 |
Ingot casting |
|
TA1 |
0.08 |
0.18 |
0.03 |
0.015 |
||
|
TA1-1 |
0.05 |
0.12 |
0.03 |
0.003 |
||
|
TA2ELI |
0.05 |
0.10 |
0.03 |
0.008 |
||
|
TA2 |
0.08 |
0.25 |
0.03 |
0.015 |
||
|
TA3ELI |
0.05 |
0.18 |
0.04 |
0.008 |
||
|
TA3 |
0.08 |
0.35 |
0.05 |
0.015 |
||
|
TA4ELI |
0.05 |
0.25 |
0.05 |
0.008 |
||
|
TA4 |
0.08 |
0.40 |
0.05 |
0.015 |
||
|
GB/T15073 |
ZTi1 |
0.10 |
0.25 |
0.03 |
0.015 |
Casting |
|
ZTi2 |
0.10 |
0.35 |
0.05 |
0.015 |
||
|
ZTi3 |
0.10 |
0.40 |
0.05 |
0.015 |
||
|
ASTMB367 |
C-2 |
0.10 |
0.40 |
0.05 |
0.015 |
|
|
C-3 |
0.10 |
0.40 |
0.05 |
0.015 |
||
Hot Tags: pure titanium casting, China pure titanium casting manufacturers, suppliers, factory, die casting titanium, titanium investment casting

