In the process of titanium alloy forging, the original microstructure characteristics of the blank, including its chemical composition, impurity distribution, selection of heat working process parameters and subsequent heat treatment process, will have a profound impact on the microstructure and mechanical properties of the final forging.
The selection of rolling temperature is a crucial link. When the rolling temperature specification is properly selected and can ensure that the blank can obtain a large deformation rate during the forging process, the defects of the original structure (such as coarse grains and low plasticity of the ingot) can be effectively eliminated, the microstructure can be reshaped, and the adverse effects of the original structure can be effectively eliminated. However, in a real-world industrial production environment, achieving such a high deformation rate is not an easy task. With the reduction of the deformation rate, the adverse effects of the original structure gradually become prominent, which poses a potential threat to the quality of the forging.
Taking titanium and titanium alloy ingots as examples, their original structure often shows coarse grains and low process plasticity. In order to improve this situation, the heating process before forging is particularly important. The strategy of heating the ingot above the phase change point and completing the main deformation process in the β zone proved to be effective. In the β zone, the deformation resistance of the material is significantly reduced, and the plasticity is greatly increased, which allows the as-cast structure to be broken more fully, thus increasing production efficiency and reducing energy consumption.
Shaanxi Hangyu Nonferrous Metal Processing Co., Ltd. was established in December 2005. It is a high-tech enterprise mainly forging and deep processing of precision parts such as titanium and titanium alloys, nickel, zirconium and other non-ferrous metal materials. Its product scope covers aerospace, weapons, marine equipment and petrochemical fields. The production capacity of titanium and titanium alloy rods, forgings and plates reaches 3,000 tons/year, and the machine-added capacity of non-ferrous metal precision parts reaches 500,000 pieces/year, and has the ability to deep processing of the entire industrial chain from titanium and titanium alloy raw materials to precision parts.

