In the precision components of aerospace and the critical parts of medical equipment, there is a material that stands out due to its high strength, lightweight properties, and excellent corrosion resistance-TC4 titanium alloy (Ti-6Al-4V). However, this "high-performance material" presents a significant challenge during bending processing, and even a slight mishandling can lead to cracking, springback, or insufficient accuracy. Today, we will combine industry practices to break down the four key considerations in processing TC4 titanium alloy bending parts, helping you avoid process pitfalls and produce high-quality components that meet the demands of advanced applications!
1. Preheating and Temperature Control: Accurate temperature control is the "first step to prevent cracking."
TC4 titanium alloy has a unique "temperament": it has very low plasticity at room temperature, and bending at low temperatures almost always leads to cracking. Therefore, preheating before bending is an indispensable step. The preheating temperature must be strictly controlled within the 200-400°C range. It is recommended to use an infrared thermometer to monitor the workpiece temperature in real time, ensuring uniform heating without dead zones.
2. Bending Speed and Pressure Control: Slow and precise compensation to avoid springback and defects.
TC4 titanium alloy exhibits a "strain aging" characteristic: when bent quickly, internal stress concentrates instantly, resulting in minor springback or severe cracking. To address this, the key is "slow" and "precise." The bending speed should be slow, controlled at ≤5mm/s; the pressure must be precise, as insufficient pressure can cause significant springback of the workpiece.
3. Die and Lubrication Selection: Choose the right "partner" to reduce friction and maintain accuracy.
TC4 titanium alloy is hard, and ordinary dies cannot withstand repeated bending-they wear out quickly, leading to subsequent workpiece precision deviations. Additionally, uncontrolled friction between the workpiece and the die can scratch the surface or cause adhesion. Select the right die material, preferably H13 hot-work tool steel; use the correct lubricant, applying a high-temperature lubricant specifically designed for titanium alloys to the contact areas between the workpiece and die before bending.
4. Post-processing and Quality Inspection: Remove stress and ensure strict control to guarantee "final mile" quality.
Completing the bend does not mean the processing is finished-internal residual stress remains in TC4 titanium alloy workpieces, which can cause deformation during later use if untreated; quality inspection is the "final checkpoint" for determining whether a part meets standards. Stress-relief annealing must be performed, and three key indicators should be strictly checked: bending angle tolerance, surface defect inspection, and mechanical performance testing.

A complete and well-established processing procedure allows each product to fully realize its intended performance. Shaanxi Aerospace Nonferrous Metals Processing Co., Ltd. has 20 years of industry experience with titanium and titanium alloys, offering professional one-stop solutions for titanium alloy forging and precision machining.
