Compared with commonly used structural materials such as steel, copper, and aluminum, titanium has a series of advantages, including low density, high specific strength, high impact resistance, excellent resistance to seawater erosion, high fracture toughness and fatigue strength, non-magnetism, high acoustic transmission coefficient, excellent neutron irradiation attenuation performance, radiation resistance, and shock absorption and noise reduction. It is thus hailed as the "marine metal" and is an ideal structural material for marine engineering equipment with broad application prospects.
Titanium has excellent corrosion resistance in marine environmental media. Due to its extremely high affinity for oxygen, a thin, dense, and strong oxide film forms rapidly on the surface of titanium materials in air or oxygen media. The oxide film of titanium has strong self-healing properties. When the oxide film is damaged or scratched, it will quickly heal or regenerate to form a new oxide film. This oxide film can prevent titanium materials from being corroded by natural seawater. Using titanium to replace stainless steel or copper-nickel alloys to manufacture heat exchangers, condensers, reactor vessels, propeller shafts, propellers, fairings, and side arrays in ship power systems can significantly increase the service life and safety reliability of the power system. Through the titanium alloying of major components, the weight of ships can be significantly reduced, and maintenance costs can be significantly lowered. The application parts of titanium alloys in marine oil and gas fields mainly include heat exchangers, lifting devices, structural components, and fasteners. Titanium alloys are widely used in components such as condensers, distillers, heat exchangers, pumps, valves, and pipe fittings in seawater desalination devices. In the deep-sea field, there are devices such as UUVs, AUVs, ROVs, buoys, and sonars, as shown in Figure 1.
However, the smelting and processing technology of titanium is complex and energy-consuming, resulting in raw material and manufacturing costs far higher than those of traditional metals such as steel and aluminum. The high price of titanium alloys limits their large-scale application in the marine field. However, considering the comprehensive costs such as the entire life cycle and maintenance costs, the cost of titanium alloys is lower than that of steel and aluminum, and the use of titanium alloy parts is highly economical. In the future, how to reduce the production cost of titanium alloys and improve the yield rate is the mission and responsibility of all technicians in the titanium industry. Further solutions to key problems such as long manufacturing cycles, welding deformation, and galvanic corrosion in the application of titanium alloys in marine engineering equipment fields are also needed.
As a high-quality supplier of the entire titanium alloy forging and precision machining industry chain, Shaanxi Hangyu Nonferrous Metal Processing Co., Ltd. has provided a variety of high-performance titanium alloy frames, pressure-resistant cabins, and precision structural components for the marine equipment field, and has the ability to stably deliver in large quantities.
