Heat treatment is the finishing touch to regulate the final performance of titanium profiles. Different types of titanium alloys correspond to different heat treatment regimes:
1. Annealing: It is the most basic and widely used process. The purpose is to eliminate processing stress, stabilize dimensions, adjust hardness, and obtain the required comprehensive performance. For (α+β) - type alloys (such as TC4), recrystallization annealing or double annealing can be used to obtain equiaxed or bimodal (α+β) structures, balancing strength and plasticity.


2. Solid solution aging: mainly applicable to β - type and β - rich (α+β) type alloys (such as TB6, TC18). Firstly, the alloy is heated to the β phase region or (α+β) phase region for solid solution treatment to fully dissolve the β stabilizing element, and then rapidly quenched to obtain metastable β phase or martensite. Then, aging is carried out at a lower temperature to precipitate small secondary α phase, achieving significant dispersion strengthening and obtaining ultra-high strength.
3. Deformation heat treatment: an advanced process that combines plastic deformation with heat treatment. For example, rapid cooling after deformation near the beta phase region can refine the beta grains; Alternatively, aging can be performed after deformation in the two-phase region to achieve a better match of strength and toughness. The precise control of heat treatment directly determines the strength, toughness, creep and fatigue performance of the profile, which is a prerequisite for meeting extreme service conditions.
●Email:lvli4457@gmail.com(same number as LinkedIn)
●Telephone:18309176299
