Grade 18 Titanium Round Bar

Grade 18 Titanium Round Bar
Details:
Gr.18 titanium alloy is one of the alloys defined in the ASTM B348 standard, with its base composition being 3% aluminum (Al) and 2.5% vanadium (V), along with 0.04% to 0.08% palladium (Pd) added to enhance corrosion resistance (especially against chloride ion corrosion).
Send Inquiry
Description
Send Inquiry

Gr.18 titanium alloy is one of the alloys defined in the ASTM B348 standard, with its base composition being 3% aluminum (Al) and 2.5% vanadium (V), along with 0.04% to 0.08% palladium (Pd) added to enhance corrosion resistance (especially against chloride ion corrosion). Main elements: titanium (Ti) as the matrix, aluminum (Al) at about 3%, vanadium (V) at about 2.5%, and palladium (Pd) at 0.04% to 0.08%. It complies with standards GB/T 2965, ASTM B348, ASTM F67, ASTM F136, and AMS4928. Some products also meet the ISO 5832/2 standard. Additionally, Gr.18 titanium alloy also meets the JIS H4600 TR270C standard, characterized by low oxygen content and excellent corrosion resistance.

 

Product parameter

 

Density: 4.47 g/cm³.

Room temperature elastic modulus: 118~123 GPa.

Phase transition point: 925℃.

Hardness: 15~17 HRC.

Thermal conductivity: approximately 7.2 W/(m·K).

Thermal expansion coefficient: 8.6×10⁻⁶/℃ (20~100°C).

Specific heat capacity: 858 J/(kg·°C).

Tensile strength: 860-1100 MPa (at room temperature).

Yield strength: 780-1000 MPa.

Elongation: 10%-15%.

Hardness: 250 HB (Brinell hardness) or 30-35 HRC (Rockwell hardness).

High-temperature performance: Tensile strength remains above 750 MPa at 300℃.

 

Processing technic

 

Diameter range: 6-300 mm.

Length range: 1000-6000 mm.

Processing conditions: annealed (M), cold worked (Y), hot worked (R), etc.

Tolerance: for diameters ≤10 mm, tolerance ±0.1 mm; for diameters>10 mm, tolerance ±0.5%.

Surface treatment: various methods are used, including polishing, acid washing, and spin coating, to improve quality and corrosion resistance.

 

Main application areas of Grade 18 titanium alloy round bar

 

Aerospace: Gr.18 titanium alloy is widely used in aircraft engine compressor components and structural parts of rockets and missiles due to its high strength, heat resistance, and corrosion resistance.

Marine Engineering: Thanks to its excellent corrosion resistance and seawater performance, Gr.18 titanium alloy is used in equipment and components for marine engineering, such as ships, underwater pipelines, and deep-sea submersibles.

Oil and Gas Extraction: In the oil and gas extraction industry, Gr.18 titanium alloy is used in downhole flow pipes and drilling tool lifting devices, especially in acid or sulfur-containing wells where its corrosion resistance is significantly enhanced.

Chemical Equipment: Due to its corrosion resistance and stable thermal expansion coefficient, Gr.18 titanium alloy is used in key components of chemical equipment and heat exchangers.

Medical Devices: Because of its biocompatibility, Gr.18 titanium alloy is widely used in medical implants and surgical instruments. Automotive Industry: In the automotive sector, Gr.18 titanium alloy is used to manufacture high-strength springs and other lightweight components.

Other Industries: Gr.18 titanium alloy is also applied in construction, power generation, and seawater desalination, favored for its superior overall performance.

Hot Tags: grade 18 titanium round bar, China grade 18 titanium round bar manufacturers, suppliers, factory, titanium bar price per kg, titanium alloy rod, Grade 4 Titanium Rod, titanium bar gr7

Send Inquiry