TA15 Titanium Alloy Plate

TA15 Titanium Alloy Plate
Details:
Product Name: TA15 Titanium Alloy Plate; Ti-6.5Al-1Mo-1V-2Zr Titanium Alloy Plate Thickness: 0.5-5mm; >5-101.6mm Width: 400-1500mm; 400-2000mm Length: 500-4000mm; 1000-6000mm standard:ASTM B265、AMS 4901、AMS 4911、GB/T3621-2007、GJB2505A-2008、GJB944A-2018
Send Inquiry
Description
Send Inquiry

Product Introduction


TA15 titanium alloy plates, as a type of lightweight and high-strength metal material, have a density of only 4.51 g/cm³, about 57% that of iron, but their specific strength is significantly higher than most metal materials. This excellent specific strength makes titanium and its alloys irreplaceable in fields such as aerospace and marine engineering. TA15 titanium alloy plate is a typical near-α titanium alloy. Through multi-element alloy design, elements such as Al, Mo, V, and Zr are added, which allows it to maintain good plasticity while possessing excellent room temperature strength and high-temperature performance. These characteristics make it an ideal material for aircraft engine compressor discs, blades, airframe structural components, and key components of spacecraft.
 

Product Parameters


1. Chemical Composition
The chemical composition of TA15 titanium alloy plate (mass fraction, %) is: Al 6.54, Mo 1.72, V 2.22, Zr 2.21, O 0.15, Ti balance.

2. Tensile Properties
The tensile properties of TA15 titanium alloy plate show that as the amount of rolling deformation increases, the alloy's strength continuously rises. The tensile strength (Rm) increases from 995 MPa to 1075 MPa, and the yield strength (Rp0.2) increases from 890 MPa to 968 MPa. However, the alloy's overall plasticity remains relatively stable with only a slight decrease, with the elongation after fracture (A) decreasing from 25% to 20%.

 

3. Common Standards
GB/T3621-2022 "Titanium and Titanium Alloy Plates"
GJB2505A-2018 "Specifications for Titanium and Titanium Alloy Plates and Strips for Aviation"
ASTM B265-20 "Standard Specification for Titanium and Titanium Alloy Pipes, Plates, Strips, and Foils"
GB/T38916-2020 "High-Temperature Titanium Alloy Plates for Aerospace"
GB/T31910-2015 "Titanium Alloy Plates for Submersibles"
GB/T26723-2011 "Cold-Rolled Titanium Coils"
GB/T31298-2014 "TC4 Titanium Alloy Thick Plates"
GJB944A-2018 "Titanium and Titanium Alloy Plates for Ships"

 

Microstructure of TA15 titanium alloy plates of different thicknesses             TA15 Titanium Alloy Plate

 

Specifications and Process


Specifications: Cold-rolled 0.5-50mm, hot-rolled 50-200mm, width 100-1500mm.
Process: Triple VAR vacuum melting → hot rolling/cold rolling → double annealing/stress relieving annealing.
Surface Treatment: Surface can be pickled or sandblasted.

Hot Tags: ta15 titanium alloy plate, China ta15 titanium alloy plate manufacturers, suppliers, factory

Send Inquiry