Product Introduction
Ti75 Alloy Plate is a low-alloy Ti-3Al-2Mo-2Zr alloy with independent intellectual property rights, containing 3% of the alpha stabilizing element Al, which plays a solid solution strengthening role in the alpha phase; Containing 2% of the β - stabilizing element Mo, it plays a role in strengthening the β phase and improving process plasticity. It also contains neutral element Zr, which improves the welding performance of the alloy. The nominal composition of Ti-75 titanium alloy has an aluminum equivalent of 3.5 and a molybdenum equivalent of 2. Its main performance characteristics are higher strength and better process plasticity than TA5. This alloy also has good welding performance and corrosion resistance.
Product Parameters
1. Chemical composition
Table 1 Chemical Composition (mass fraction/%)
| Alloy elements | Impurity elements (not exceeding) | |||||||
|
Al |
Mo |
Zr |
Fe |
C |
N |
H |
O |
Si |
|
2.5-3 |
1.0-2.5 |
1.0-3.0 |
0.30 |
0.10 |
0.05 |
0.015 |
0.15 |
0.15 |
2. Physical and chemical properties of Ti75 Alloy Plate.
The density is ρ=4.53g/cm3.
Non magnetic.
Thermal conductivity is shown in Table 2.
|
θ/℃ |
85 |
200 |
350 |
440 |
543 |
642 |
846 |
|
λ/(W/(m·K)) |
10.0 |
11.4 |
12.2 |
12.7 |
15.8 |
16.7 |
22.8 |
The coefficient of linear expansion is shown in Table 3.
|
θ/℃ |
85 |
200 |
350 |
440 |
543 |
642 |
846 |
|
λ/(W/(m·K)) |
10.0 |
11.4 |
12.2 |
12.7 |
15.8 |
16.7 |
22.8 |
Good corrosion resistance.
3. Mechanical properties
Tensile properties: The tensile mechanical properties of Ti75 Alloy Plate in the transverse rolling direction are shown in Table 4.
| Direction |
Rm /MPa |
Rp0. 2 /MPa |
A/% |
(Rm-Rp0. 2)/MPa |
Rp0. 2 /Rm |
|
TD |
775.5 |
725.5 |
18 |
50 |
0.936 |
|
RD |
762.0 |
650.0 |
17 |
112 |
0.853 |
High temperature tensile properties: The high-temperature tensile properties of Ti75 alloy 14mm thick sheet are shown in Table 5.
|
θ/℃ |
Rm /MPa |
Rp0. 2 /MPa |
A/% |
Z/% |
|
100 |
703 |
673 |
18 |
72 |
|
200 |
590 |
540 |
20 |
78 |
|
300 |
525 |
463 |
22 |
78 |
|
400 |
503 |
453 |
25 |
80 |
|
600 |
411 |
- |
28 |
- |
|
700 |
246 |
- |
31 |
- |
|
800 |
108 |
- |
104 |
- |
|
850 |
46 |
- |
137 |
- |
Impact performance: The impact toughness of Ti75 Alloy Plate is shown in Table 6.
| Direction | Impact value | Average | ||
|
TD |
113 |
111 |
115 |
113 |
|
RD |
98 |
97 |
89 |
95 |
Product features and applications
Characteristics of Ti75 Alloy Plate.
The transverse tensile strength, yield strength, elongation, and impact toughness of Ti75 alloy sheet are superior to those in the rolling direction, especially with a large difference in yield strength, resulting in a much greater transverse yield ratio than in the rolling direction, and the sheet exhibits significant anisotropy.
Application field
Ti75 Alloy Plate combines the advantages of various titanium alloys, with characteristics such as moderate strength, high toughness, and good weldability. It was developed to meet the needs of ship power systems and ship machinery, and its performance is comparable to that of the Russian ship titanium alloy π T-3B. It has been used in reciprocating saltwater pumps, sea systems, ball valve stems, and other equipment, and has broad application prospects in the fields of ships, petroleum, chemical engineering, etc. In the field of ships, titanium alloy materials are relatively commonly used as pipes, especially in high-pressure, fast flow, and highly corrosive medium sea system pipelines, which have obvious advantages and can significantly improve the reliability of pipeline systems.
Product detail analysis
The anisotropy of yield strength and impact toughness of Ti75 Alloy Plate is mainly caused by the texture of the sheet, while the tensile strength mainly depends on the strengthening effect of elements. The different influencing factors result in significant differences in the tensile yield ratio of the sheet in different directions.
The impact toughness of Ti75 alloy sheet is closely related to aging temperature and aging time. When formulating aging process, attention should be paid to both aging time and aging temperature. Considering the energy consumption of heat treatment, the 750 ℃/2h/AC aging process can be used to improve the impact toughness of Ti75 alloy with layered structure.
Packaging and after-sales service
Basic packaging: Wrap Ti75 Alloy Plate with moisture-proof paper and plastic film, and then pack it in wooden boxes or iron sheets.
After sales service: Each batch of products comes with a Ti75 alloy sheet quality certificate, indicating product information, inspection results, etc., to ensure product quality and traceability.
Provide customized services: Support customized packaging solutions based on customer needs, such as special labeling and protective packaging. Support the provision of technical services, such as advice on product application, processing, installation, and other aspects.
Attention: Specific product parameters and packaging plans need to be confirmed with the procurement and supplier.
Hot Tags: ti75 alloy plate, China ti75 alloy plate manufacturers, suppliers, factory

