Ti-6554 Titanium Alloy Bar

Ti-6554 Titanium Alloy Bar
Details:
Ti-6554 titanium alloy bars can be widely used as raw materials for fasteners and structural components in aviation, aerospace, and other civil fields, with extremely promising prospects for promotion and application. Our company has many years of research experience in Ti-6554 titanium alloy bars and has the capability to stably produce bars in specifications of Φ10~60×L mm in large quantities.
Send Inquiry
Description
Send Inquiry

Product Introduction

 

Ti-6554 titanium alloy, corresponding to the domestic grade TB15, has a nominal composition of Ti-6Cr-5Mo-5V-4Al. Ti-6554 titanium alloy is a new type of metastable β titanium alloy, which has a good match of strength and toughness. It has great application potential in aerospace, automotive, deep-sea, and other fields.

 

Product Parameters

 

1.Physical Properties

The β-stabilizing coefficient Kβ of Ti-6554 titanium alloy bars is approximately 1.67, the Mo equivalent is 16.7, the Al equivalent is about 5, and the oxygen equivalent is about 0.79. The phase transformation temperature measured by metallographic method is 770±5℃.

 

2. Microstructure

The microstructure photos of typical grain sizes of Ti-6554 titanium alloy bars, with grain sizes of 100µm, 125µm, 150µm, 175µm, 200µm, and 250µm, are shown in Figure 1.

 

Microstructure of typical grain size
Figure 1  Microstructure of typical grain size

 

3. Mechanical Properties

The room temperature mechanical properties of Ti6554 titanium alloy bars after different solution and aging heat treatments are shown in Table 1. When the solution temperature is increased above the phase transformation point, the strength and plasticity of Ti6554 titanium alloy in the solution-aged state do not differ significantly, but both strength and plasticity are noticeably lower than those of the alloy solution-treated at 750°C.

 

 

Table 1 Room temperature mechanical properties

 

Heat treatment process

Product diameter,mm

Status Sampling direction Room temperature tensile properties

σb /MPa

σp0.2/ MPa

δ5/%

ψ/%

720℃Insulation30 min,Air cooling+500℃Insulation8h,Air cooling

20

STA

L

1250

1100

15.5

59

750℃Insulation 30 min,Air cooling+480℃Insulation8h,Air cooling

20

STA

L

1480

1410

16

40

780℃Insulation30 min,Air cooling+480℃Insulation 8h,Air cooling

20

STA

L

1400

1280

7

25

820℃Insulation30 min,Air cooling+480℃Insulation8h,Air cooling

20

STA

L

1410

1300

6

14

 

Product Features and Applications

 

Ti-6554 titanium alloy bars, like other β-titanium alloys, can achieve strengthening effects through the dispersion of secondary α phase. Compared with earlier high-strength and high-toughness titanium alloys such as Ti-1023 and BT22, Ti-6554 titanium alloy has superior strength-toughness balance. It offers a series of advantages including high specific strength, good fracture toughness, high hardenability, excellent hot working performance, and superior machinability. It can be widely used as raw materials for fasteners and structural components in aviation, aerospace, and other civilian fields, with extremely promising prospects for promotion and application. Our company has many years of research experience with Ti-6554 titanium alloy bars and is capable of mass producing bars in the specifications of Φ10~60×L mm with stable quality.

 

Product Details Introduction

 

Ti-6554 titanium alloy rod wire is primarily delivered as machined standard parts. The appearance is uniform in color, with no defects such as cracks, folds, or scratches, and the dimensional tolerances meet standard requirements. It is generally shipped in wooden boxes after soft packaging.

 

After-Sales Service

 

Our company has always adhered to the principle of "Quality is the life of the enterprise," aiming to enhance customer satisfaction. All employees faithfully fulfill their quality responsibilities, implement effective quality control throughout the entire process, and continuously improve. The company provides after-sales service through multiple forms, including planned annual customer visits, occasional visits, consultation on product quality issues, and on-site services. The company has a dedicated after-sales service team to promptly and effectively handle customer feedback. We promise to propose solutions and take action within 48 hours regarding quality information. When necessary, on-site negotiations for resolution can be conducted, always with the aim of customer satisfaction.

Hot Tags: ti-6554 titanium alloy bar, China ti-6554 titanium alloy bar manufacturers, suppliers, factory, titanium bar price per kg, titanium bar gr7, Grade 4 Titanium Rod, titanium alloy rod

Send Inquiry